Compare Prices

Dake Cold Saw

Dake Cold Saw - Dake 974355-2 model 350SA Semi-Automatic Cold Saw,14
Dake 974355-2 model 350SA Semi-Automatic Cold

Dake Cold Saw

974355-2 350SA 14 inch.

  • Brand: Dake
  • ASIN: B01C2LXPYC
Dake Cold Saw - Dake B-10 Model Manual Utility Hydraulic Bench Press, 10 Ton Capacity, 23
Dake B-10 Model Manual Utility Hydraulic Bench Press, 10 Ton Capacity, 23" Length x 18" Width x 36"

Dake Cold Saw

The Dake B-10 model manual utility hydraulic bench press uses a single-speed hydraulic handpump to lower the ram with up to 10 tons of force to facilitate pressing and forming. The channel iron H-frame accepts large and bulky items, and the hoist adjusts the table height for proper positioning. The workhead is movable to adjustment for off-center pressing. The hydraulic cylinder and pump handle can be positioned on either side of the press to maximize workspace and comfort. The release valve turns to release the hydraulic pressure, initiating ram return after downstroke. Closing the valve at any point during the ram return will halt the ram.Two interchangeable ram noses are included: a flat nose piece for use in standard pressing operations and a step-reduced nose piece for supporting, positioning, or fitting into pieces when pressing. The two table plates provide support during pressing. The press has a gauge with a 2-1/2"-dia. display for pressure readings. The base has four 7/16"-dia. holes for bench mounting. Mounting hardware is not included. Hydraulic oil is not included. Press requires some assembly.SpecificationsLoad capacity10 tonsMax. working height16 inchesMin. working height4 inchesRam travel6 inchesTable dimensions16-3/4 x 3 inches (W x L)Press overall dimensions36 x...

  • Brand: Dake
  • ASIN: B00DWB1MTM
Dake Cold Saw - Dake Super Technics 350CE Model Manual Cold Saw, 220V, 3 Phase, 14
Dake Super Technics 350CE Model Manual Cold Saw, 220V, 3 Phase, 14" Maximum Blade Diameter, 75" Height x 24.75" Width x 23"

Dake Cold Saw

The Dake Super Technics 350CE model manual cold saw uses up to 14" circular cold saw blades, has a dual-speed 3.5 hp motor, and mounts on an included pedestal that houses a built-in coolant tank and pump. The blade rotates at either 22 or 44 rpm, selected by a switch. The saw head pivots up and down to cut, and rotates 45 degrees to the right and left of center for miter cuts, and 90 degrees to the right to cut slots. The work bed includes a cam-operated vise with gib adjustment and a cushioned clamping arm that helps prevent burrs in the final cutting stroke. The saw drive has an oversized steel spindle and a tapered bronze roller bearing gear assembly for heavy-duty use. The hardened and ground spindle shaft has ball bearing support for reliability. The clutch device can be adjusted for maintenance. The saw is wired for three-phase, 220 volt AC operation, and has protection for low voltage and thermal overload.SpecificationsMaximum blade diameter14 inchesMotor power3.5 hpVoltage220 VAC, 3-phaseSpeeds22/44 rpmSolid round 90-degree capacity3.375 inchesSolid round 45-degree capacity3 inchesTube 90-degree capacity4.75 inchesTube 45-degree capacity4 inchesSquare 90-degree capacity4.125 inchesSquare 45-degree capacity3.375 inchesRectangle 90-degree capacity6.25 x 3.5 inchesRectangl...

  • Brand: Dake
  • ASIN: B00DWB22NC
Dake Cold Saw - Dake Cut 250 Model Manual Cold Saw, 110V, 1 Phase, 10
Dake Cut 250 Model Manual Cold Saw, 110V, 1 Phase, 10" Maximum Blade Diameter, 61" Height x 21" Width x 20.25"

Dake Cold Saw

The Dake Cut 250 model manual cold saw uses up to 10" circular cold saw blades, has a 1.2 hp motor, and mounts on an included pedestal that houses a built-in coolant tank and pump. The blade rotates at 44 rpm. The saw head pivots up and down to cut, and rotates 45 degrees to the right and left of center for miter cuts. The saw drive has an oversized steel spindle and a tapered bronze roller bearing gear assembly for heavy-duty use. The hardened and ground spindle shaft has ball bearing support for reliability. The saw is wired for single-phase, 110 volt AC operation.SpecificationsMaximum blade diameter10 inchesMotor power1.2 hpVoltage110 VAC, single-phaseSpeeds44 rpmSolid round 90-degree capacity1.25 inchesSolid round 45-degree capacity1 inchesTube 90-degree capacity2.75 inchesTube 45-degree capacity2.375 inchesSquare 90-degree capacity2.5 inchesSquare 45-degree capacity2.125 inchesRectangle 90-degree capacity3.875 x 1.75 inchesRectangle 45-degree capacity2.5 x 1.875 inchesOverall dimensions61 x 21 x 20.25 inches (H x W x L)*Work height37 inchesOverall front to back head up35 inchesWeight378 lb.*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; L is length, the horizontal distance from front to back.Cold...

  • Brand: Dake
  • ASIN: B00DWB1UQ2
Dake Cold Saw - Dake 12-1/2
Dake 12-1/2" 2.5 HP Manual Cold

Dake Cold Saw

Head rotates 45dg right and left of center for miter cutting.áAdjustable oversized spindle and gear assembly with steel spindle and bronze gear.áAdditional ball bearing support of hardened and ground spindle shaft to prevent failure.áBronze gear with tape

  • Brand: Dake
  • ASIN: B01BH7LA8U
Dake Cold Saw - Dake Super Cut 315 Model Manual Cold Saw, 220V, 3 Phase, 12
Dake Super Cut 315 Model Manual Cold Saw, 220V, 3 Phase, 12" Maximum Blade Diameter, 59" Height x 26" Width x 23"

Dake Cold Saw

The Dake Super Cut 315 model manual cold saw uses up to 12" circular cold saw blades, has a dual-speed 2.5 hp motor, and mounts on an included pedestal that houses a built-in coolant tank and pump. The blade rotates at either 22 or 44 rpm, selected by a switch. The saw head pivots up and down to cut, and rotates 45 degrees to the right and left of center for miter cuts. The work bed includes a cam-operated vise with gib adjustment and a cushioned clamping arm that helps prevent burrs in the final cutting stroke. The saw drive has an oversized steel spindle and a tapered bronze roller bearing gear assembly for heavy-duty use. The hardened and ground spindle shaft has ball bearing support for reliability. The saw is wired for three-phase, 220 volt AC operation, and has protection for low voltage and thermal overload.SpecificationsMaximum blade diameter12 inchesMotor power2.5 hpVoltage220 VAC, 3-phaseSpeeds22/44 rpmSolid round 90-degree capacity2.625 inchesSolid round 45-degree capacity2.5 inchesTube 90-degree capacity3.625 inchesTube 45-degree capacity3.5 inchesSquare 90-degree capacity3.25 inchesSquare 45-degree capacity3.125 inchesRectangle 90-degree capacity4.25 x 2.75 inchesRectangle 45-degree capacity3.25 x 2.75 inchesOverall dimensions59 x 26 x 23 inches (H x W x L)*Work he...

  • Brand: Dake
  • ASIN: B00DWB1YKO
Dake Cold Saw - Dake 974350-2 Semi-Automatic Cold Saw, 14
Dake 974350-2 Semi-Automatic Cold Saw, 14", Model

Dake Cold Saw

Model 350SA 14" Semi-Automatic Cold Saw, 220v-3 ph 3 speed.

  • Brand: Dake
  • ASIN: B00PRRHYMI
Dake Cold Saw - Dake F-10 Model Manual Utility Hydraulic Floor Press, 10 Ton Capacity, 24
Dake F-10 Model Manual Utility Hydraulic Floor Press, 10 Ton Capacity, 24" Length x 28" Width x 60"

Dake Cold Saw

The Dake F-10 model manual utility hydraulic floor press uses a single-speed hydraulic handpump to lower the ram with up to 10 tons of force to facilitate pressing and forming. The channel iron H-frame accepts large and bulky items, and the hoist adjusts the table height for proper positioning. The workhead is movable to adjustment for off-center pressing. The hydraulic cylinder and pump handle can be positioned on either side of the press to maximize workspace and comfort. The release valve turns to release the hydraulic pressure, initiating ram return after downstroke. Closing the valve at any point during the ram return will halt the ram.Two interchangeable ram noses are included: a flat nose piece for use in standard pressing operations, and a step-reduced nose piece for supporting, positioning, or fitting into pieces when pressing. The two table plates provide support during pressing. The press has a gauge with a 2-1/2"-dia. display for pressure readings. The base has four 7/16"-dia. holes for floor mounting. Mounting hardware is not included. Hydraulic oil is not included. Press requires some assembly.SpecificationsLoad capacity10 tonsMax. working height38 inchesMin. working height0 to 4 inchesRam travel6 inchesTable dimensions16-3/4 x 3 inches (W x L)Press overall dimensio...

  • Brand: Dake
  • ASIN: B00DWB1RCY
Dake Cold Saw - Dake 50H Model Hand Operated H-Frame Hydraulic Press, 50 Ton Capacity, 43.5
Dake 50H Model Hand Operated H-Frame Hydraulic Press, 50 Ton Capacity, 43.5" Length x 36" Width x 85"

Dake Cold Saw

The Dake 50H hand-operated H-frame hydraulic press applies up to 50 tons of force to facilitate pressing and forming. The channel iron H-frame accepts large and bulky items, and the hoist adjusts the table height for proper positioning and automatically locks in place. The workhead is mounted on bearings to enable adjustment for off-center pressing. The handwheel advances the ram for quick placement near the object being pressed. The handpump lowers the ram onto the object with more precision and control than the handwheel. The release valve turns to release the hydraulic pressure, initiating rapid ram return after downstroke. Closing the valve at any point during the ram return will halt the ram.The press has a gauge with a 4"-dia. display for pressure readings. It also includes two table plates for support and two V-blocks that hold the item in place during pressing. Interchangeable V-shaped and flat shaped ram noses are also included. Four 17/32"-dia. holes are located on the base to enable bench mounting. Mounting hardware is not included. Hydraulic oil is not included. Press is assembled.SpecificationsLoad capacity50 tonsRam travel4 inchesScrew travel7 inchesHorizontal workhead travel20-3/4 inchesMax. working height40 inchesMin. working height5 inchesTable dimensions32-3/4 x...

  • Brand: Dake
  • ASIN: B00DWB0VSK
Dake Cold Saw - Dake 10
Dake 10" Dia. 2-3/4" Round Capacity 44 RPM 1.2 HP Motor Manual Cold

Dake Cold Saw

Head rotates 45dg right and left of center for miter cutting.áAdjustable oversized spindle and gear assembly with steel spindle and bronze gear.áAdditional ball bearing support of hardened and ground spindle shaft to prevent failure.áBronze gear with tape

  • Brand: Dake
  • ASIN: B01BH7L5TO

Dake Cold Saw F1120 Search Results

Looking for more Dake Cold Saw similar ideas? Try to explore these searches: Backyard Toys, Smead Pressboard Fastener Folder, and Fury Throwing Knives.